Pressing Instructions

Pressing Instructions

Set your Heat Press to 320°F

(note that every heat press is different, yours may need to be set a little higher or lower)

Lint roll then pre-press the garment for 10 seconds to remove excess moisture.

Place the transfer on the shirt – white side down, image facing up.

1st Press: Cover the image with Teflon or parchment sheet Press at 320°F for 10 seconds under medium pressure.

COLD peel

2nd Press: Cover the image with Teflon or parchment sheet, 320°F for 10 seconds under medium pressure.

Do not wash or dry the heat pressed garment for at least 24 hours after pressing.

 

Commercial heat press is recommended.

Transfer can be pressed on 100% cotton, 100% polyester, and poly/ cotton blends.

 

NOTE: We are not responsible for transters being pressed incorrectly. We do not accept any returns or exchanges for our products. Actual product colors may vary from photo due to device display capabilities and monitor settings. Listing is for a transfer ONLY; no garment will be included.